Olipa kyseessä pikkuleivät, keksit, välipalat tai muut leivonnaiset, leipomoalan tuotteet ovat korvaamaton osa päivittäistä ruokavaliotamme. Tämä tarkoittaa, että teollisten leipomolinjojen on pyörittävä jatkuvasti, huolimatta kaikesta.
“SAFE & CLEAN Bakery Belts for all your applications. Helping you bake it better!”
Giuseppe Allais
Global Industry Segment Manager Food
Bakery: Cookies
Explore Bakery processes and our recommended products
Explore using the drop-down menu or by clicking on the pointers
This infographic is used as a general indicative example only.
Actual factory and process configurations could vary, but our industry experts know them all. Above overview shows the factory lay-out with the rotary cutter. The rotary moulder and depositor are published separately. Please use the drop-down menu for more details.
Tästä se alkaa! Märän taikinan käsittelyllä leipomotuotteet saavat ensimmäiset muotonsa.
Main challenges
- Sticky dough can cause release difficulties
- Belts with dough residue can be hard to clean
- Mistracking and slippage often occur with contaminated belts
Solutions
- Better release performance with non-stick material and non-stick surfaces
- Easy-to-clean and maintain belt surfaces
- Light blue belts for easier detection of residue or contaminants
Tämä taikinan tasaisen paksuuden varmistava prosessivaihe vaatii korkealaatuisen hihnan siirtymiin laminointiasemien välillä.
Main challenges
- Accurate belt tracking and regular belt speed are essential
- Belt surfaces must be easy-to-clean
Solutions
- Belt body with a high degree of lateral stability
- Non-stick belt surface for easy release and easy cleaning
- Light blue belts to facilitate detection of hygiene / contamination issues
Kun taikina on hauras ja ohut, keksien laatu riippuu suurelta osin käytettävästä hihnasta. Siinä on oltava oikeat tarttuvuus- ja irtoamisominaisuudet leikkuuprosessin aikana.
Main challenges
- The correct alignment between product and rotary cutting drum must be maintained
- The process activity can shorten belt life
- Maintaining accurate product speed on the belt is essential
- The product release to the next belt needs to be as smooth as possible
Solutions
- A belt body with a high degree of lateral stability
- Superior grip and release belt properties, thanks to innovative belt materials
- A belt designed for durability as well as performance
Päättömiksi kudotut AmDough-hihnat tarjoavat vertaansa vailla olevan valikoiman hihnoja eri lankavaihtoehdoilla ja eri kudonnoilla. AmDough-ratkaisut takaavat rotary moulder -käyttöihin parhaan mahdollisen hihnan sekä oikean taikinan irtoamisen.
Main challenges
- Belts wear out or lose performance standards quickly
- The mould can “trap” the dough, leading to unacceptable wastage levels
Solutions
- Durable truly Endless Woven Belts for long-lasting, reliable performance
- Treated belt to reduce possible shrinkage
- A selection of optimal fabrics for reliable dough extraction
Erilaiset täyteaineet pursotetaan suuttimista suoraan hihnalle keksien päälle. Hygienia ja öljyn- ja rasvankestävyys ovat tässä hyvin tärkeitä.
Main challenges
- The dough transfer can be problematic
- Belts can leave imprints on the dough
- Covers must be cleaned to rigorous standards
Solutions
- Belts with high flexibility for better transfer
- A smooth and glossy belt surface to avoid any imprints
- Scraper-friendly belt material to make cleaning easier
Releasing the thin dough as the products head into the oven and then taking the biscuits off the steel belt after the baking process are both very delicate steps in the manufacturing process. High temperatures, high-speeds and very small transfer points for reliable product positioning are all elements that require high-quality, high-performance belts.
Main challenges
- The extreme operational conditions can lead to short belt lifetimes
- Product release from the Infeeder can be problematic
- Improper product positioning after transfer from Infeeder can lead to product waste
Solutions
- High-quality polyurethane Ultranyl synthetic belt material for high temperatures
- Heat-resistant and flame-retardant Modular Belts
- Inclined and reinforced splices on Synthetic Belts for longer lifetimes
- Non-stick matt belt finish for easy and reliable release
Ennen paistettujen keksien siirtämistä uunista käärintäkoneisiin, on tärkeää varmistaa, että tuote on jäähtynyt riittävästi käsittelyä varten.
Main challenges
- Belts often mistrack
- The heat can cause a browning effect on the belts
- Product can slip on belt surface while moving on inclined bridge belt sections
- Belt installation can be time-consuming and labour-intensive
Solutions
- Extra lateral belt fabric stability to avoid mistracking
- High-quality belt materials, including Ultranyl, Nonex and Ropanyl, for heat-resistance and superior operational performance
- State-of-the-art Maestro splicing tools for quick and easy belt installation
A very delicate stage in the production process, stacking is carried out by a set of conveyors (one of which runs at a lower speed than the other) gently overlapping and piling up the cookies along the metal rails for the horizontal flow-wrap packing equipment.
Main challenges
- Product damage and a consequent accumulation of crumbs can be caused by belt friction
- Crumbs can present cleaning issues
- Metal rails can damage the belt’s top cover
Solutions
- Low-friction belt top cover finish, even in the splice area
- Very fine matt finish for delicate cookie handling
- Wear-resistant cover material capable of withstanding frequent contact with metal
To ensure that the finished product ends up in just the right position for the flow-pack equipment, precise belt grip is essential. Accumulating or pulling fragile products requires either perforated high-grip belts or matt-finish belts to ensure low friction.
Main challenges
- Belt grip must be consistent and reliable
- Belt tolerances for packaging applications are very tight
- Belts for this application often have short lifetimes
Solutions
- Ammeraal Beltech One-Stop Belt Shop for just the right belt
- A wide variety of profiled belts and cover materials / finishes for precise performance and grip
- Belts made from flexible and durable materials for long-lasting
SuositeltuTuotteet
Suositellut tuotteet ovat vain osa laajaa tuotevalikoimaamme, joka on toimialan laajin. Asiantuntijamme auttavat sinua löytämään oikean hihnan. Täytä yhteydenottolomake tai mene yhteystietosivullemme.
tuoteResurssit
Etsi ja lataa tekniset tuotetiedot tietyille tuotekoodeille ja tuoteversioille.
| Artikkelikoodi | Kuvaus | Lataa | ||||
|---|---|---|---|---|---|---|
| AmDough EW Biscuit Bakeries-en |
AmDough EW Biscuit Bakeries
|
— | Toimialaesite | — | — | |
| SBNO571320 |
Nonex EM 8/2 00+03 white AS FG
|
1.6 mm | — | 65A Shore | 20 mm | |
| SBNO572780 |
Nonex EM 8/2 00+03 light blue AS FG AM
|
1.6 mm | — | 65A Shore | 20 mm | |
| SBRY550001 |
Dectyl EM 6/2 00+03 dark blue M1 AS FG MD
|
1.3 mm | — | 85A Shore | 6 mm | |
| SBRY550002 |
Dectyl EM 6/2 00+03 dark blue AS FG MD
|
1.3 mm | — | 85A Shore | 6 mm | |
| SBRY576749 |
Ropanyl ESM 5/2 00+015 light blue M1 AS FG AM NF
|
1.3 mm | — | 93A Shore | 5 mm | |
| SBRY576750 |
Ropanyl ESM 5/2 00+015 light blue AS FG AM NF
|
1.3 mm | — | 85A Shore | 5 mm | |
| SBRY577950 |
Ropanyl EM 6/2 00+02 white AS FG
|
1.5 mm | — | 85A Shore | 6 mm | |
| SBRY577951 |
Ropanyl EM 6/2 00+02 white M2 AS FG
|
1.5 mm | — | 85A Shore | 6 mm | |
| SBRY579790 |
Ropanyl EM05 6/1 00+02 light blue AS FG AM
|
1.1 mm | — | 85A Shore | 10 mm |