A Tangential Belt drives hundreds of spindles on a ring spinning frame on which the roving will be stretched by the multiplier of 40-50 and be twisted and wound on a coil.
The higher the speed of the spindles, the better the quality, so high performing belts are key.
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Download | |||
|---|---|---|---|---|---|
| FBTT054249 |
TT S15.23 C
|
2.3 mm | 15 N/mm | 90 mm | |
| FBTT054250 |
TT S09.16 C
|
1.65 mm | 9 N/mm | 60 mm | |
| FBUU054542 |
UU E15.30 RFQ FG
|
3 mm | 15 N/mm | 30 mm | |
| FBUU054555 |
UU E22.20 RRQ FG
|
2 mm | 22 N/mm | 30 mm | |
| FBUU054556 |
UU E22.30 RRQ FG
|
3 mm | 22 N/mm | 40 mm | |
| FBUU054561 |
UU E15.20 RFQ FG
|
2 mm | 15 N/mm | 25 mm |
Get in Touch
A Tangential Belt drives hundreds of spindles on a ring spinning frame on which the roving will be stretched by the multiplier of 40-50 and be twisted and wound on a coil.
The higher the speed of the spindles, the better the quality, so high performing belts are key.
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Download | |||
|---|---|---|---|---|---|
| FBGG054289 |
GG S11 LRC
|
3.25 mm | 11 N/mm | 80 mm | |
| FBGG054297 |
GG S22 LRC
|
4.6 mm | 22 N/mm | 220 mm | |
| FBGG054298 |
GG S33 LRC
|
5.7 mm | 33 N/mm | 310 mm | |
| FBGG054530 |
GG S11.26 RFC
|
2.6 mm | 11 N/mm | 60 mm | |
| FBGG054614 |
GG E08.20 RRQ
|
2 mm | 8 N/mm | 25 mm | |
| FBGG054627 |
GG E35.30 RRQ
|
3 mm | 35 N/mm | 60 mm | |
| FBGG054655 |
GG E15.20 RFQ
|
2.05 mm | 15 N/mm | 25 mm | |
| FBGG054656 |
GG E15.25 RFQ
|
2.5 mm | 15 N/mm | 30 mm | |
| FBGG054657 |
GG E15.30 RFQ
|
3 mm | 15 N/mm | 40 mm | |
| FBGG054665 |
GG E22.25 RFQ
|
2.5 mm | 22 N/mm | 40 mm |
Get in Touch
Drive Belts are flexible, relatively inexpensive, simple to install and maintain and require minimal space. Perhaps most significant is their high efficiency – nearly 99%.
This high efficiency is achieved thanks to lower bending losses (due to the thin cross section), low creep because of special friction covers and high modulus of elasticity traction layers.
The perfect solution for hydro plants, saw mills, fan drives and many other drive applications.
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Download | |||
|---|---|---|---|---|---|
| FBLL054038 |
LL S06 C
|
3.5 mm | 6 N/mm | 70 mm | |
| FBLL054039 |
LL S09 C
|
3.8 mm | 9 N/mm | 90 mm | |
| FBLT054045 |
LT S06 C
|
2.6 mm | 6 N/mm | 50 mm | |
| FBLT054046 |
LT S09 C
|
2.9 mm | 9 N/mm | 70 mm | |
| FBLT054047 |
LT S11 C
|
3 mm | 12 N/mm | 100 mm | |
| FBLT054048 |
LT S15 C
|
3.6 mm | 15 N/mm | 150 mm | |
| FBLT054049 |
LT S18 C
|
3.75 mm | 18 N/mm | 200 mm | |
| FBLT054050 |
LT S27 C
|
5.1 mm | 27 N/mm | 350 mm | |
| FBLT054051 |
LT S36 C
|
5.9 mm | 36 N/mm | 400 mm |
Get in Touch
Drive Belts are flexible, relatively inexpensive, simple to install and maintain and require minimal space. Perhaps most significant is their high efficiency – nearly 99%.
This high efficiency is achieved thanks to lower bending losses (due to the thin cross section), low creep because of special friction covers and high modulus of elasticity traction layers.
The perfect solution for hydro plants, saw mills, fan drives and many other drive applications.
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
Get in Touch
Drive Belts are flexible, relatively inexpensive, simple to install and maintain and require minimal space. Perhaps most significant is their high efficiency – nearly 99%.
This high efficiency is achieved thanks to lower bending losses (due to the thin cross section), low creep because of special friction covers and high modulus of elasticity traction layers.
The perfect solution for hydro plants, saw mills, fan drives and many other drive applications.
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Download | |||
|---|---|---|---|---|---|
| FBGG054289 |
GG S11 LRC
|
3.25 mm | 11 N/mm | 80 mm | |
| FBGG054297 |
GG S22 LRC
|
4.6 mm | 22 N/mm | 220 mm | |
| FBGG054298 |
GG S33 LRC
|
5.7 mm | 33 N/mm | 310 mm | |
| FBGG054530 |
GG S11.26 RFC
|
2.6 mm | 11 N/mm | 60 mm | |
| FBGG054614 |
GG E08.20 RRQ
|
2 mm | 8 N/mm | 25 mm | |
| FBGG054627 |
GG E35.30 RRQ
|
3 mm | 35 N/mm | 60 mm | |
| FBGG054655 |
GG E15.20 RFQ
|
2.05 mm | 15 N/mm | 25 mm | |
| FBGG054656 |
GG E15.25 RFQ
|
2.5 mm | 15 N/mm | 30 mm | |
| FBGG054657 |
GG E15.30 RFQ
|
3 mm | 15 N/mm | 40 mm | |
| FBGG054665 |
GG E22.25 RFQ
|
2.5 mm | 22 N/mm | 40 mm |
Get in Touch
Soliflex belts can be customised for specific conveying requirements.
A wide range of regular and scoopcleats up to 150 mm high are available.
The standard configuration consists of:
Get in Touch
Soliflex Sawtooth and Crescent
Search and download technical data sheets for specific article codes and product variations.
| Article Code | Description | Download |
|---|---|---|
| Soliflex (RS) |
Crescent and Sawtooth
|
Get in Touch
The new Soliflex RS belts are extruded as homogeneous thermoplastic sheets and have aramid cords to prevent belt elongation. Produced according to strict specifications, these sheets can simply be cut to size and welded.
| Article Code | Description | Download | |
|---|---|---|---|
| soliflex-rs-product-information-sheet-en |
Soliflex Rs Product Information Sheet
|
Product Sheet |
Get in Touch
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Download | |||
|---|---|---|---|---|---|
| SFPE000025 |
Soliflex TPE/20 light blue FG
|
80 mm | 3.5 N/mm | 2 mm | |
| SFPE000050 |
Soliflex TPE/30 light blue FG
|
80 mm | 5 N/mm | 3 mm | |
| SFPU000031 |
Soliflex TPU/30 R18T light blue FG
|
70 mm | 2.5 N/mm | 3 mm | |
| SFPU000032 |
Soliflex TPU/30 R18B light blue FG
|
70 mm | 2.5 N/mm | 3 mm | |
| SFPU000070 |
Soliflex TPU/15 light blue FG
|
30 mm | 1.1 N/mm | 1.5 mm | |
| SFPU000075 |
Soliflex TPU/20 light blue FG
|
40 mm | 2 N/mm | 2 mm | |
| SFPU000080 |
Soliflex TPU/30 light blue FG
|
70 mm | 3 N/mm | 3 mm | |
| SFPU000085 |
Soliflex TPU/40 light blue FG
|
130 mm | 3.5 N/mm | 4 mm |
Get in Touch
X-Ray & Metal detectable homogeneous belts for improved food safety and foreign body prevention.
The Soliflex XMD belt range helps to detect broken belt fragments with a proven sensitivity control level. The belt works with metal detectors and X-ray machines. Special test cards help to determine the minimum size.
Soliflex XMD is currently available in 2 styles:
What’s the smallest belt fragment that can be detected?
Minimum size depends on many factors such as type of x-Ray & metal detector, ring size, belt speed, vibrations, humidity, food product, and fragment shape and position. As there is no industry standard for the smallest detectable particle, Soliflex XMD test cards are even more unique in helping you determine the correct parameters.
| Article Code | Description | Download |
|---|---|---|
| soliflex-xmd-product-information-sheet-en |
Soliflex Xmd Product Information Sheet
|
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Download | |
|---|---|---|---|
| SFPU001132 |
Soliflex FB TPU/30 Blue FG 95A MD
|
— | |
| SFPU001002 |
Soliflex RS TPU/25 A18T L. blue FG XMD
|
2.5 mm | |
| SFPU001003 |
Soliflex RS TPU/25 M1T A18B L. blue FG XMD
|
2.5 mm | |
| SFPU001121 |
Soliflex CB TPU/30 Blue 300mm FG 1 row 95A MD
|
— | |
| SFPU001122 |
Soliflex CB TPU/30 Blue 450mm FG 1 row 95A MD
|
— | |
| SFPU001123 |
Soliflex CB TPU/30 Blue 600mm FG 1 row 95A MD
|
— | |
| SFPU001124 |
Soliflex CB TPU/30 Blue 800mm FG 1 row 95A MD
|
— |
Get in Touch
