Manufacturing a tyre not only requires the latest technology, precision instruments and qualified people but also requires qualified suppliers.
Working together with our customers and leading research institutions, we have developed a full range of belting products for the Tyre Industry.
With the unique product portfolio of fabric based Process and Conveyor Belts, as well as uni Modular Belts, Ammeraal Beltech provides the best technical belting solutions for all tyre manufacturing processes.
Explore Tyre Manufacturing processes and our recommended products
Przeglądaj za pomocą menu rozwijanego lub klikając wskaźniki
Ta infografika służy wyłącznie jako ogólny przykład orientacyjny.
Rzeczywiste konfiguracje fabryk i procesów mogą się różnić, ale nasi eksperci branżowi znają je wszystkie.
Składniki dla danego typu receptury opony wymagają odważenia i przeniesienia do mieszalnika.
Główne wyzwania
- Mistracking of the belt due to heavy load (load not always spread over the entire belt width)
- Sliding of raw materials on the belt surface
- Belt elongation due to heavy load causes more maintenance
Rozwiązania
- Ammeraal Beltech Synthetic Belts with folded edges against fraying and v-ropes for better tracking
- uni Modular Belts to solve all issues
Raw materials are mixed into a homogeneous rubber compound. There are two different mixing types in the market:
- ‘Banburry’ – material mixed between 2 big drums (3-4 stages)
- ‘Continuous mixing’ – material mixed between two belts (sandwich) for 15-20 minutes
Główne wyzwania
- The rubber compound is very sticky
- Compound temperatures between 120 °C to 180 °C
- More change over due to multiple recipes
Rozwiązania
- Ammeraal Beltech Synthetic Belts with Silam coatings for very good non-stick characteristics and resistance against the high temperatures
- Felt or Fabric Belts for the infeed and outfeed conveyors
- Mill to mill transport with our plastic modular solutions (available as metal detectable)
Mieszanka gumowa wymaga składowania na paletach przed nadejściem kolejnego etapu wytwarzania. Aby zapobiec sklejaniu się gumy jest ona zanurzana w kąpieli z wodą z mydłem, chłodzona oraz przechowywana z modułem wahania na paletach.
Główne wyzwania
- Very dirty environment (soap, water, temperature ~80° C)
- Rubber can be very sticky (bad release properties of the chosen belt)
- Belts in the dip tank are difficult to change
Rozwiązania
- Ammeraal Beltech Synthetic Belts with impregnation have non-stick characteristics
- Our Modular Belts with the biggest open structure in the market to guarantee a good soap / water penetration in the dip tank
- Unique ZipLink® range for easy installation and less downtime
Jest to mechaniczny proces, w którym guma jest wprasowywana w materiał tekstylny (płótno, materiał) lub kord stalowy w celu uformowania arkuszy kompozytowych. Kalandrowane materiały tekstylne są wykorzystywane do produkcji obudów, opasania opon i fartuchów
Główne wyzwania
- Rubber can be sticky (bad release properties of the chosen belt)
Rozwiązania
- Ammeraal Beltech Synthetic Belts with impregnation have non-stick characteristics
- Our Modular Belts for longer lifetime and less maintenance
- AmWind liner solutions
inished steel cord (for Breaker Belt, Body Ply) and textile cord (Body Ply, Strip) is cut into appropriate sizes, shapes, and angles depending on the desired contour of the tyre.
There are three different cutting methods:
- Guillotine
- Rotary
- Hot blade
Główne wyzwania
- Conveyor belts can be damaged from the cutting device
- Vacuum is necessary for easy transport
- Replacement of timing belts on the feeder lines
Rozwiązania
- Ammeraal Beltech Synthetic Belts with different covers specially chosen for the used cutting methods
- Quick fastener solution or welding solutions for timing belts
- Our AmWind liner solutions
Extrusion is the process by which heated rubber (80 °C – 120 °C) is pushed, under high-pressure, through an extruder head, to pre-shape the rubber. The next step is the cooling line where the rubber (tread, sidewall) is cooled and the dimensions are stabilised. The new semi products need to be stored before the next production step (TBM) and this is done via winding units (liner) or other storage systems.
Główne wyzwania
- Friction on the feeder belt must work perfect (no slippage but still good release)
- No mechanical fasteners allowed due to possible imprint on the rubber
- Long cooling lines are needed to cool down the rubber
- Pollution or waste due to damaged liner materials
Rozwiązania
- Ammeraal Beltech synthetic belts with impregnation to have non-stick characteristics
- Our plastic modular belts with an open structure to guarantee a good water penetration in the cooling lines
- Non fraying liner material to avoid rubber pollution
- AmWind liner solutions
This is a mechanical process by which multiple rubber layers are pressed in a multi-roll calender towards one homogeneous rubber layer. An alternative is rollerhead equipment. The rubber compound plasticised in the extruder is conveyed via a wide extrusion die directly into the roll nip of a two-roll calender.
Główne wyzwania
- Rubber can be sticky (bad release properties of the chosen belt)
Rozwiązania
- Ammeraal Beltech Synthetic Belts with impregnation to have non-stick characteristics
- Our Modular Belts for longer lifetime and less maintenance
- AmWind liner solutions
The first step in final finishing involves the tyre-building machine (TBM), with over 40 components that work to form the green tyre.
Główne wyzwania
- Rubber does not release from belt
- Low coefficient of friction between belt and rubber causes rubber to slip
- Many parallel running timing belts to accommodate extra-wide rubber leads to different elongation and mistracking
Rozwiązania
- Ropanol Belts offer good release of sticky rubber
- Grip covers available
- Ultrasync Belts with widths up to 1000 mm
Curing is the process of applying pressure to the green tyre in a mould in order to give it its final shape, and applying heat energy to stimulate the chemical reaction between the rubber and other materials.
After the tyres are cured in the press, they are often cooled down on a conveyor belt and then transported to the trench line (collector line).
Główne wyzwania
- Temperature impact during cool down phase
- Mistracking of the conveyor due to temperature impact and wrong material combination
Rozwiązania
- Ammeraal Beltech heat resistant Modular Belts
- Our roller top belts for the trench line
Po opuszczeniu prasy wulkanizacyjnej opony są schładzane przed poddaniem kontroli i odbiorem. Gotowe opon wymagają delikatnego traktowania, dlatego do transportu stosowane są taśmy rolek transferowych.
Główne wyzwania
- Tyres can jam on the belt, requiring manual intervention
Rozwiązania
- Gentle handling from Felt NPF Belts and uni Modular Belts RTB M1 and M2 eliminate jams
Finished tyres need to be stored (short term) before they are transported to the hubs of the sales channels.
This storage has a demand of intralogistics where conveyor belts are often used.
To quickly load and unload trucks it is common to use telescopic loading systems.
Rozwiązania
- Ammeraal Beltech Modular Belts for longer lifetime and less maintenance
- Our Synthetic Belts with easy connection solutions (ZipLock)
ZalecaneProdukty
Polecane produkty to tylko podzbiór naszej obszernej oferty, najszerszej w branży. Nasi eksperci pomogą Ci znaleźć odpowiedni pas. Wypełnij formularz kontaktowy lub przejdź do strony Kontakt.
| Kod artykułu | Opis | Pobierz |
|---|---|---|
| SBRO511512 |
Ropanol ESM 15/3 01+00 green AS NL
|
|
| SBSI514281 |
Silam ESM 10/2 00+01 red AS
|
|
| SBFE000045 |
Felt NPF 40 black HC
|
|
| SBNB582001 |
AmWind 600/900 white
|
|
| SBNB582002 |
AmWind 600/900 green
|
|
| SBNB582005 |
AmWind 600/900 light blue
|
|
| ZLFL583010 |
Flexam EZP 10/1 0+10 black M2 FR
|
|
| uni_snb_m2_34 |
uni SNB M2 34%
|